Four Column Clicker Press
-
100 Ton Hydraulic Manual Beam Press From Yancheng Jeakar
★ Precision four-column cutting machine is widely used in a variety of industry molding die for all kinds of non-metallic materials cutting work.
★ Double cylinder, precision four-column double crank connecting rod balance structure, to ensure that each cutting position of the same depth of the cut.
★ Unique set structure, with the cutting knife and cut the depth of the set, so that stroke adjustment is simple and accurate.
★ Cut the pressure plate to contact the cutter when the slow cut, so that the cutting of the material between the top and bottom there is no size error.
★ All the sliding parts of the central oil supply automatic lubrication system to ensure that the machine’s life and accuracy.
-
150T Fully automatic hydraulic beam press machine
1. Maximum cutting force 1500KN
2. Stroke adjustment range 0-145mm
3. The distance between pressing plate and workbench is 20-165mm
4. Workbench area 2300 mm (width) × 1400mm (deep)
5. Overall dimension (l*w*h) 5800 × three thousand and four hundred × 1600mm
6. The production speed is 3-5 times / minute, about 4 meters / minute
7. Conveyor belt width 2300mm
8. Pneumatic with automatic tool clamping die device
9. Machine weight 14500kg
10. Power supply 380v/50hz
11. Fuel tank volume 450L
-
80T Automatic roller feeding cutting press machine
★ The double oil cylinders work at the same time, and the precision four-column automatic balance mechanism ensures that the accuracy of each pressing position is controlled within 0.1mm. The oil cylinder of this machine adopts the overflow cylinder, which has good pressure stability and fast movement speed.
★ Man-machine interface, PLC programmable control, automatic feeding mechanism, fault display information, convenient for machine maintenance, and increase work efficiency by 80%.
★ The machine is equipped with a safety protective isolation cover to make the operation safer.
-
Single side automatic feeding four column cutting press
Single side auto feeding cutting machine is widely used for garment,shoemaking ,leather ,sponge ,luggage and baggage ,automobile decoration,hats ,woods ,plastic packing ,packing ,toys ,stationery ,plyurethane preocessing and air conditioner refrigeration etc
-
150T 6 column conveyor belt automatic feeding cutting press
It is widely used for continuous cutting for soft material.like foam ,leather ,fabric etc .
-
Double side automatic feeding four column cutting press
It is widely used for Sandpaper, medicine, plastic, foam, floor, felt, car interior, PP,PE,EVA,EPE,EPP,EPS, sponge, rubber, bubble film, double-sided glue, advertising paste, magnetic paste, insulation cotton, , computer accessories, paper, mat, Xuan paper, fan, seal, protective clothing, film, jigsaw puzzle, chocolate, filter material, sound-absorbing cotton, corrugated board, clean cloth, non-woven cloth, leather, seat cover, foot pad, umbrella, mouse pad, carton, cup, tablecloth, simulation flower, raincoat, hat, ear cover, mask, glove, insole.
-
100T Single side automatic feeding four column cutting press
PRODUCT USAGE It is widely used for continuous cutting for soft material.like foam ,leather ,fabric etc . PRODUCT FEATURES ★ This machine adopts six-column guide, four oil cylinders, precision double-link automatic balance mechanism, four-column block fine-tuning mechanism to ensure the die-cutting speed and accuracy of the machine, all sliding connection parts adopt central oil supply automatic lubrication device to make Wear is minimized. ★ Due to the high precision of the cutting... -
40T Manual four column cutting press
★ Precision four-column cutting machine is widely used in a variety of industry molding die for all kinds of non-metallic materials cutting work.
★ Double cylinder, precision four-column double crank connecting rod balance structure, to ensure that each cutting position of the same depth of the cut.
★ Unique set structure, with the cutting knife and cut the depth of the set, so that stroke adjustment is simple and accurate.
★ Cut the pressure plate to contact the cutter when the slow cut, so that the cutting of the material between the top and bottom there is no size error.
★ All the sliding parts of the central oil supply automatic lubrication system to ensure that the machine’s life and accuracy.
-
150T Fully automatic hydraulic beam press machine
1. Maximum cutting force 1500KN
2. Stroke adjustment range 0-145mm
3. The distance between pressing plate and workbench is 20-165mm
4. Workbench area 2300 mm (width) × 1400mm (deep)
5. Overall dimension (l*w*h) 5800 × three thousand and four hundred × 1600mm
6. The production speed is 3-5 times / minute, about 4 meters / minute
7. Conveyor belt width 2300mm
8. Pneumatic with automatic tool clamping die device
9. Machine weight 14500kg
10. Power supply 380v/50hz
11. Fuel tank volume 450L
-
50Ton Four column beam press
Easy to operate
One feeding table, available to sheet and rolls materials, is easily operated by one worker. Cutting stroke setting constructure combined with the cutting knife and cutting height make stroke setting easy.Cutting depth can be fine adjusted.
-
100T Automatic hydraulic plastic blister packaging die cutting press
1. This machine is suitable for fully automatic unloading of blister materials in the packaging industry.
2. This machine adopts double oil cylinders and a precise four-column double crank connecting rod balance structure to ensure the same cutting depth at each cutting position.
3. The unique setting structure, coordinated with the cutting knife and cutting depth setting, makes the stroke adjustment simple and accurate.
4. This machine adopts PLC, touch screen control, can set the working pressure and various parameter settings, fault point detection, etc., the operation is simple and fast.
5. All sliding parts adopt the central oil supply automatic lubrication system to ensure the service life and accuracy of the machine.
6. The oil cylinder adopts a high-stroke oil cylinder, which is a concave-convex mold suitable for packaging materials. It has the advantages of fast working speed, stable pressure, and low oil temperature.
7. The discharging system is driven by a servo motor with fast speed and high precision.
8. With a high-performance suction cup system, the position of the suction cup can be adjusted individually.
